New Version Sundance Spas 6600-018 Circuit Board

• 1 & 2 Pump Systems

• For spas without Perma Clear (No Circulation Pump)

• eprom REV 1.29E

• Used on inground models

• Click Here to download wiring schematic (PDF)

Note: The 6600-023, 6600-028, 6600-017 and 6600-018 are the same board but with different eproms.

To help clarify: A Non-Circulation Pump System used a REV 1.29 Eprom chip. If your board has an Eprom chip with a 1.29 (usually starting with "REV" located on a chip on the board) then the circuit board you need is the 6600-018.

Systems with Circulation Pumps usually have used Eproms with 1.28E, 1.28F and 1.28FB. If your board has one of these Eprom chips you have a system with a circulation pump the board you need is the 6600-017.

Note: A circulation pump is a smaller pump like a Grundfos or Laing Pump (See Sundance® Spas Circ Pumps Here). It is not one of the main jet pumps

Used In the Following Sundance® Spas
1995: Cameo® 850, Capri® 850, Corum 850, Marin® 850, Optima® 850 (6600-014 was used until 10/95 then replaced by 6600-018)

• 1996-1997: Cameo® 850, Capri® 850, Corum 850, Marin® 850, Optima® 850

• Used on Inground Models