Description

Description

6600-720 Circuit Board, Sundance® Spas, Sweetwater and Jacuzzi® Spas. Non Circulation Pump system

Sundance® Spas used the same board on different series but sometimes would change the eprom on the board to function on a different system, but not the part number on the board. So the part number on the board may be incorrect. This is essential in getting the correct board is to look at the eprom. This is a small 1/4 inch by 1 inch (approx) on the board itself with a white sticker that started with REV. This is crucial to ordering the correct board, see info below in making the correct choice, if unsure then send a picture of the board with the eprom number visible. Also if your year and model is not listed below it is probably not for your spa.

If your circuit board has a Software Chip that begins with a 5, (such as REV 5.54) then this is the correct series board. The manufacture has revised this chip several times, we send you the board with the current chip. Do not attempt to use your original eprom chip off of your old board. This Circuit Board is for Spas WITHOUT a Circulation Pump. (See 6000-125 for reference as to what a Circulation Pump looks like, it is NOT your main 2 speed pump!). We ship out the latest revision of this board.

If your board uses an eprom chip that begins with a 3 (such as REV 3.26) then you may need the 6600-726 board. The 6600-720 and the 6600-726 (6600-288) are the same board but different eproms.

The 6600-726, 6600-720, 6000-167, 6600-288, 6600-046, 6600-287 are the same boards with different Microchips

6600-720 replaces the 6600-087, 6600-287, 6600-046 Circuit Boards

For the following Sundance® Spas and Sweetwater Spas Without Circulation Pump:
(See 6000-125 for reference as to what a circulation pump looks like)

For Sundance® Spas and Sweetwater Spas:

06/2014+ 680 McKinley® and Ramona® models NOT equipped with a circulation pump
01/2014+ 680 Edison® and Peyton® models NOT equipped with a circulation pump
2013-05/2014 680 Hartford and Hawthorne models NOT equipped with a circulation pump
2013 680 Edison® (used 6600-046 with 5.59+ eprom)
2012+ 680 Hartford, Hawthorn and Peyton® models NOT equipped with a circulation pump (used 6600-046 with 5.59+ eprom) 2013+ cir pump feature no longer available.
2008+ 1-pump 680 Burlington model NOT equipped with a circulation pump
2007-2011 680 Hartford and Hawthorne models NOT equipped with a circulation pump
2006-2007 2 pump 680 Burlington
2000-2002 Sweetwater Board (Palermo and Bahia)NOT equipped with a circulation pump

For Jacuzzi® Spas:

Jacuzzi® Spas J-200 Series LED Circuit Board 6600-287 is for J-230 without Circulation Pump
J-270 & J-280 without Circulation Pump (models introduced mid year).

For Winchster Spas:

Kensington

Replaces these part numbers: 6600-204, 6600-083, SD LX-15, 3-60-0095,6600-201, 6600-087, 6600-287

Click Here to download wiring schematic (PDF)
Important: New Board Revision Programing Instructions (PDF)

ALL 6600-287, 6600-087 boards (without circulation pump logic, Chip 5.54)and 6600-288, 6600-088 (with Circulation Pump Logic, Chip 3.56)are identical but use different micro chips

*If you have a board with a Circulation pump, then you need a board with a Series Chip that starts with a 3, which is 6600-288

Replaces these boards: SD LX-15 Export Main Alpha (hand written in back of board: LX15 3-70-0307) ASS# 3-60-0095 Rev A chip reads: LX Rev 5.03

This Sundance® Spas Circuit Board is returnable only for warranty. Please See Return Policy: http://www.spaandpoolsource.com/return-policy.aspx

Additional Information

For All Sundance® Spas, Sweetwater Circuit Boards, Click Here!

We ship select Sundance® Spas parts with FREE GROUND SHIPPING with a $4.95 handling fee on all orders. ( Contiguous U.S. only). Please see our Shipping Policy!

View AllClose