Description
*FREE Standard Ground Shipping on this item with a $4.95 handling fee on all orders (Contiguous U.S. Only). Please see our Shipping Policy!
Spa Pump for Sundance Spas
6500-293, 6500-793, 6500-345
Specifications:
13.3/4.1 Amp
2 Speed
1.5 HP
120 Volt
48 Frame
New Motor with Sundance/Jacuzzi Piranha Wet End
The Pump is complete with a US Motor and wet end The difference between the Factory Pump and ours is that ours comes with the original welded bracket on the motor instead of the bracket mount currently used by Sundance. Our pump replaces the original found in your spa that had the mounting bracket welded to it.
This can be used for other spas by simply adjusting the position of the wet end by loosening the 4 bolts (this is a thru bolt motor) and turning the wet end to the position of the original pump and then retightening the 4 bolts. We send the pump in the 6500-293 position which is in the 9:00 position.
Notes:
We use only a Viton Seal on our Wet ends for long life. The viton seal is designed for harsh chemical environments such as salt, ozone and chemically treated water.These seals are more costly than a standard seal used by most of our competitors.
Do not install any 1.5 Hp Pump that has a higher Amp Draw (such as the Waterway 3420610-10). This could damage the Circuit Board and trip the GFI from too high of current load.
This 120 Volt Pump is the Current Replacement for these old part numbers: 6500-135, 6500-258, 6500-758, 6500-345
Used on the Following Sundance Spa Models:
Caprio - 2000-2005 (NOT the Caprio ST)
Tango - 2000-2003
This pump can be used for the following pump numbers by rotating the wet end to match the position of the original pump.
6500-259
6500-258
6500-293
6500-345
6500-759
6500-758
6500-793
Additional Information:
For parts for this pump, click here.
Visit our Facebook page for a how-to video on replacing the Jet Pump in your Sundance Spa