Sundance® Spas Flow Switch 6560-852

Details:

• Replaces the Harwil Q-12DS, Q-12DS50 with 1/2" threads

• Rated at: 50 Watt Max. Resistive, 10 Watt Inductive (Coil) 120-240 VAC. 5-28 VDC 0.5A DC Switching. 2.5 DC Steady State

• Does not come with cables

• 3/4" slip x slip T with 1/2" threaded reducer for 1/2" threaded flow switch

• Has standard spade terminals (2 spade terminals)

• Can be removed out of the T fitting and installed in existing T fitting on your spa with ½" threads

• For 3/4" thread see the 6560-860 Flow Switch

Used On the Following Sundance® Spas Models:

• All Sundance® Spas 800/850 Models using the 6500-301 Bypass Heater, up to 5/1999

• 780 Dover, 2008-03/2017

• Metro and Solo, 2007

• Caprio, Metro and Solo, 2006

• 780 Lagunas Models, 2005

• 850E Series: Caprio, Metro, Solo

• All Portofino Models, 2000-2004: Metro, Solo

Used On the Following Jacuzzi® Spas Models:

• J-315, 2004+

• J-325, 2004 and 2008+

• J-310, 2002-2003

Installation:

• Click here for video instructions on replacing your flow switch

• The connectors on the Flow Switch are attached to a PC Board connector that is located on the PC Board (usually at the top). There are other wires connected to this plug:

• Jumper interlock wire, Flow Switch, High Limit sensor, and Temp sensor

• Remove the pin connector from the board.

• To remove a sensor or switch wire from the sensor harness connector, insert a paper clip into the slot corresponding with the wire to be removed. This will depress the pin tine, allowing the wire to be pulled from the harness connector.

• Important! When reinstalling the sensor or switch wire back into the sensor harness connector, make sure the pin tine is lifted (approx. 1/32") prior to inserting the wire. This will ensure the sensor wire locks into the harness connector. Do not over bend the pin tine or it may break off.

Troubleshooting:

• A defective flow switch will cause a "Flashing Flo" or "Solid Flo" on the Control Panel Icon.

• "Solid Flo" is the Flow Switch

• "Flashing Flo" could be:

• Flow Switch, Circulation Pump (clogged or defective), or Dirty Filter

More Information:

We're on Facebook! Follow us for instructional videos and more!

*FREE Standard Ground Shipping on this item with a $4.95 handling fee on all orders (Contiguous U.S. Only). Please see our Shipping Policy!

For All Sundance® Spas Flow and Pressure Switches, Click Here!