LX Pump 56WUA400-I, Spa Pump Replacement for Sundance® Spas & Jacuzzi® Spas: 4.0HP 230 Volt, 12 Amp, 1 Speed

Pump, LX 56WUA-I, 56 Frame, 4.0 HP, 230 Volt, 12.0 Amp, 1-Speed, 2"MBT, Side Discharge.
This pump can be used in place of the 6500-352 pump used on Sundance® Spas and Jacuzzi® Spas. However for exact replacement for the 6500-352, see below in the Related Products for pump WITHOUT the Bracket.

READ PRIOR TO ORDERING: READ PRIOR TO ORDERING: SUNDANCE and JACUZZI pump 6500-352 is a bracketless pump. The 56WUA400-I comes with a standard industry welded bracket for mounting. The pump wet end configuration is shipped with the discharge as shown at the 12:00 o'clock postion. Does not need the 6000-532 foot bracket from old pump.The wet end can be turned to the 6:00 or the 9:00 o'clock configuration by loosening the 4 thru bolts on the motor and turning the wet end and reattaching the 4 thru bolts once turned. This pump WILL NOT turn to any other configuration, so you need to verify that this pump will work in your configuration. We are not responsible for installation. If there is a question on that email us a picture of your pump and postion it is in and we will assit you with compatability.

NOTE: This item has a 35% restocking from the distributor and if returned must be in new and unused condition plus you pay the shipping both ways. See Return Policy

Specifications

• LX Series Pump

• 240 Volt

• 1 Speed

• 4.0 HP

• 56 Frame

• Inlet and Outlet measures 3 inch outside diameter. This is for 2 inch Unions. Front Face plate measures 7.5 inch
  Comes with Pump Unions and Orings
  

• Takes the place of the 6500-341 in Mid 2010 for 680/780 Sundance® Series and Jacuzzi® Spas (see below)

Can be used on the following Sundance® Spa Models: Please verify that the pump wet end position will work in your spa, see Notes in Red above!

• Aspen®, June 2009+ (2 each)

• Altamar, 2012+ (2 each)

• Bristol, 2017+ (2 each)

• Cameo®, August 2008+ (2 each)

• Capri®, January 2009+

• Chelsee®, Hamilton, Hartford, Hawthorne: Mid year (05/2010 change: 680/780 Series Pump/Motor changed from 48 Frame 6500-341 to 56 Frame 6500-352 (requires (1) 6500-352, the other jet pump is 6500-367)

• Claremont, 2017+ (2 each)

• Edison®, 2013+,  requires (1) 6500-352, the other jet pump is 6500-367

• Hamilton 05/2010+

• Hanover, 2017+ (2 each)

• KIngston, 2017+ (2 each)

• Majesta®, June 2009+ (2 each)

• Marin®, January 2009+ (2 each)

• McKinley, 06/2014+ (requires (1) 6500-352, the other jet pump is 6500-367)

• Montclair, 04/2013+ (requires (1) 6500-352, the other jet pump is 6500-367)

• Maxxus, 2009+ (2 each) 

• Optima®, 8/2008 (2 each)

• Peyton, 2012+ (requires (1) 6500-352, the other jet pump is 6500-367)

• Ramona®, 06/2014+ (requires (1) 6500-352, the other jet pump is 6500-367)

• Victoria, 2011+ (requires (1) 6500-352, the other jet pump is 6500-367)

This can take the place of the 6500-901, 6500-902, and 6500-903 pumps. However, you may need some modification to retrofit this pump if the 901, 902, or 903 was used. For these part numbers, we recommend and offer the original pumps. See below in Related Products.

Used on the Following Jacuzzi® Spa Models:

• 2012 and Newer:

• J-XL®, J-LXL® (Pump 2)

• J-465 (Pump 2)

• J-335, J-355, J-365, J-375 (Pump 2)

• J-235, J-245, J-270, J-275, and J-280 (Pump 2)

• J-470, J-480 (Pump 1)

• J-425, J-495 (Pumps 1 and 2)

• August 2010-2011:

• J-XL®, J-LXL® (Pump 2)

• J-480, J-470, J-465, J-460 (Pump 2)

• J-375, J-365, J-355 (Pump 2)

• J-280, J-270

• 2007-July 2010

• J-480, J-470, J-465, J-460

• Replaced pump 6500-341 (48F) in July 2010+ for J-300/J-200 Series

Notes:

Parts from this pump are not compatable with any other. This pump is made in China and uses metric threading. See Related parts for replacment items.

*FREE Standard Ground Shipping on this item with a $4.95 handling fee on all orders (Contiguous U.S. Only). Please see our Shipping Policy

Visit our Facebook page for a how-to video on replacing the Jet Pump in your Sundance® Spa

For All Sundance® Pumps, Click Here!