LX Spa Pump 48WUA1001C-II, 48 Frame, 1 HP, 2 Speed, 115 Volt

Pump, LX 48WUA1001C-II, 48 Frame, 1.0HP, 115 Volt, 10.3/3.8Amp, 2-Speed, 2"MBT

LX Pump can replace the Waterway Executive Pump 1HP, 115 Volt, 48 Frame, 2 Speed with 2 inch inlet and 2 inch discharge

Specifications

• LX Series Pump

• 115 Volt 10.3/3.8 Amps

• 2 Speed

• 1.0 HP

• 48 Frame

• 2 Inch inlet and 2 inch return. Outside thread diameter of inlet and outlet measures 3 inch.
• Outside measurement of Front Face Plate is 7 1/2 inches.

To turn the pump in the direction that you need for your application: Wet ends can be oriented in 90 degree increments to meet your requirements. (See photos above) Loosen the pump's four through bolts (8mm) from the back of the motor and pull them back enough to disengage. Then rotate the wet end to the desired position, realign and re-tighten the bolts. If you need it in a certain position we will also do it for you.When ordering just put the position you want in the order notes if you want the postion changed by us: The postions are (see pictures above going from left to right of 4 smaller pictures) 12:00, 3:00, 9:00

More Information

Important: The parts from this pump are not compatable to the Sundance Theramax/Theraflo/Aquaflo Pumps, If yours was the Aquaflo pump used in this time period and you are wanting parts for replacement, you must use the parts listed here.

Visit our Facebook page for a how-to video on replacing the Jet Pump in your Sundance SpaFor All Sundance Pumps, Click Here!