Sundance Spas LX Spa Pump 48WUA2002C-II, 48 Frame, 2 HP, 2 Speed, 230 Volt

Pump, LX 48WUA2002C-II, Small Frame, 2.0HP, 230Volt, 10.0/3.0Amp, 2-Speed, 2"MBT

LX Pump can replace the Waterway Executive Pump and Aquaflo 06120500-2040 2HP, 230 Volt, 48 Frame, 2 Speed with 2 inch inlet and 2 inch discharge. May take some modification due to diffetnt height of Inlet/Return fitting.

Specifications

• LX Series Pump

• 240 Volt

• 2 Speed

• 4.0 HP

• 48 Frame

• 2 Inch inlet and 2 inch return. Outside thread diameter of inlet and outlet measures 3 inch.
• Outside measurement of Front Face Plate is 7 1/2 inches.

To turn the pump in the direction that you need for your application: Wet ends can be oriented in 90 degree increments to meet your requirements. (See photos above) Loosen the pump's four through bolts (8mm) from the back of the motor and pull them back enough to disengage. Then rotate the wet end to the desired position, realign and re-tighten the bolts. If you need it in a certain position we will also do it for you.When ordering just put the position you want in the order notes if you want the postion changed by us: The postions are (see pictures above going from left to right of 4 smaller pictures) 12:00, 3:00, 9:00

More Information

Important: The parts from this pump are not compatable to the Sundance Theramax/Theraflo/Aquaflo Pumps, If yours was the Aquaflo pump used in this time period and you are wanting parts for replacement, you must use the parts listed here.

Visit our Facebook page for a how-to video on replacing the Jet Pump in your Sundance SpaFor All Sundance Pumps, Click Here!